HOME / PRODUCTS / HARDWOOD FLOORING

FOUR DIMENSION · COSWICK HARDWOOD CATALOGUE

Hardwood Flooring
Collection

Discover the timeless beauty of genuine hardwood. Explore classic oak and ash, wide-plank European designs, parquet patterns and rich natural wood finishes from the supplied Coswick collection catalogue.

18 detailed flooring ranges · 2 pattern references · Floor care & accessories · Enquiry-based browsing

Coswick Brushed and Oiled Oak Chabaud hardwood flooring in a furnished interiorCOSWICK · HARDWOOD FLOORS
EXPLORE THE SUPPLIER CATALOGUE

Find a finish that suits your space

Browse the collection families and open any card for documented colour names, wood species, finish options and brochure dimensions. The photographs illustrate collections or patterns; they are not substitutes for exact shade samples.

18FLOORING
RANGES
COLLECTION GROUP 01

Classic & Designer Plank Flooring

Compare oak, ash and richly coloured hardwood species across classic, brushed, country and signature ranges.

Classic Oak

Solid, 2-layer T&G, 3-layer CosLoc 5G

Traditional lacquered oak with a seven-tone palette, from Vanilla to Charcoal.

Classic Ash

2-layer T&G, 3-layer CosLoc 5G

Expressive ash grain in light, natural and darker tones; exact finish varies by colour.

Quarter Sawn Oak

Solid hardwood plank

Distinctive quarter-sawn grain with a fine linear character and natural figure.

Brushed & Oiled Oak

Solid, 2-layer T&G, 3-layer CosLoc 5G

Gently wire-brushed oak reveals deeper texture and its naturally varied grain.

Country Oak

Solid, 2-layer T&G, 3-layer CosLoc 5G

Characterful oak highlighting knots, tonal movement and a relaxed aged look.

Signature Oak

3-layer CosLoc 5G

Designer oak palette of sandy neutrals, muted greys and rich dark tones.

Signature Ash

2-layer T&G, 3-layer CosLoc 5G

Contemporary ash tones ranging from pale silver to deep charcoal-grey.

Heritage Oak

Solid hardwood, 3-layer CosLoc 5G

Heritage-inspired surfaces using subtle tonal and two-colour effects.

Exotic Woods

2-layer T&G, 3-layer CosLoc 5G

Deep-grained hardwood species with rich colours and distinctive natural character.

COLLECTION GROUP 02

European Wide-Plank Collections

Long-format oak boards in natural, rustic and Scandinavian-inspired colour palettes.

Arts & Crafts Oak

3-layer CosLoc 5G wide plank

European-inspired long planks, gently brushed and finished in hardwax oil.

Norwegian Wood Oak

3-layer CosLoc 5G wide plank

Wide oak boards inspired by Scandinavian interiors, natural texture and earth tones.

COLLECTION GROUP 03

Parquet, Mosaic & Patterned Flooring

Explore geometric wood-flooring arrangements, from Versailles panels to chevron and Uniblock designs.

Versailles Mosaic

Geometric mosaic panels

Interwoven square parquet modules inspired by traditional château interiors.

Langeais Mosaic

Geometric mosaic panels

Star-like geometric panel designs in oak, walnut and contrasting wood combinations.

Cheverny Mosaic

Geometric mosaic panels

Architectural parquet panel pattern with woven geometric strip details.

Renaissance Pattern

2-layer T&G engineered parquet

Fixed-length boards for decorative parquet arrangements including herringbone.

Chevron Parquet

2-layer T&G engineered chevron

Precision-cut planks meeting in a continuous pointed zigzag pattern.

Uniblock Parquet

Solid preassembled block

Compact solid-wood block flooring with varied straight-strip patterns.

Zebrano Linear

3-layer CosLoc 5G

A linear-patterned flooring design creating a continuous, textured visual rhythm.

Trianon Mosaic Pattern Reference

Pattern reference

Named and diagrammed alongside Versailles, Langeais and Cheverny on the supplier's mosaic overview, but no separate dimensional, finish or colour specification is provided in this PDF.

Herringbone Pattern Reference

Pattern reference

The catalogue illustrates herringbone on the pattern overview. Its Renaissance engineered planks are described as suitable for herringbone arrangements; this is not an independently specified herringbone SKU.

BROCHURE REFERENCE 04

Coswick Floor Care Products

Nine numbered product groups from the brochure, including cleaners, oils, waxes and repair products. Enquire for availability before specifying.

Coswick Service Kit

Service kit

Microfiber mop cloth and ready-to-use Coswick Hardwood Cleaner.

Hardwood Floor Cleaners & Concentrates

Cleaning product

Catalogue item 2 contains separate cleaning formulas for lacquer/UV-oiled and natural/Hardwax-oiled flooring, in ready-to-use and concentrate formats.

Renewer Oil — UV-Oiled Floors

Finish renewal

Surface-renewal oil for hardwood finished with UV oil.

Renewer Oil — Natural / Hardwax

Finish renewal

Renewal product intended for natural-oil and Hardwax-oil finishes.

Protective Wax for Hardwood

Protective finish

Protective wax intended for restoring natural-, Hardwax- and UV-oiled floors.

Tinted Restoration Oil

Restoration oil

Tinted oil intended for repairing floors with natural oil or Hardwax oil finishes.

Heavy Duty Cleaner

Specialist cleaner

Cleaning product for lacquered and oiled prefinished hardwood, including glue marks after installation and deep stains.

Coswick Wood Stain

Wood stain

Wood staining product for changing the appearance of suitable wood surfaces.

Coswick Wax Filler

Spot-repair filler

Ready-to-use wax product for small repairs on wood floors, listed across Coswick colours.

BROCHURE REFERENCE 05

Moldings & Flooring Accessories

Stair nosing, transition profiles and baseboards from the manufacturer's molding range. Cross-section diagrams are schematic, not product photographs.

Stair Nosing

Flooring accessory

Finishing profile for timber stair edges.

Reducer

Flooring accessory

Transition profile between different flooring heights.

Carpet Reducer

Flooring accessory

Transition profile at carpet and wood-floor edges.

Baseboard No. 7

Flooring accessory

Veneered skirting/baseboard profile.

Baseboard No. 8

Flooring accessory

Veneered skirting/baseboard profile.

No matching catalogue item. Try another material, colour or pattern.

TECHNICAL GUIDE · AS SHOWN IN SUPPLIED BROCHURE

Understanding hardwood construction

Solid hardwood

Natural wood planks. The brochure describes 19.05 mm board thickness and nail or staple-down installation on wooden subfloors.

2-layer engineered T&G

12.7 mm engineered boards, bonded wood veneer over a birch plywood base. Glue-down or specified nail-down methods.

3-layer engineered CosLoc 5G

Typically 15 mm boards with interlocking construction for floating installation. Supplied sizes depend on the collection.

Decorative parquet modules

Patterned flooring includes 19.05 × 635 × 635 mm mosaic panels, Chevron strips and preassembled Uniblock tiles.

Important: This is a faithful collection overview from the uploaded Coswick catalogue, not a verified list of current UAE inventory. Dimensions, colours, finishes, installation suitability and warranties must be confirmed against the specific current supplier product and project requirements. Coswick’s present-day product range may differ.

Catalogue construction & installation reference

ConstructionTypical dimensions in catalogueBrochure installation notes
Solid T&G19.05 mm thick; widths 82.55, 107.95, 127 mm; lengths 300–1845 mmOn or above grade, nailed or stapled over a suitable timber subfloor. Wear layer listed as 7 mm.
2-layer engineered T&G12.7 × 107.95 × 300–1845 mmGlue down over suitable concrete or wooden subfloor or nail down as specified. Wear layer listed as 4 mm over cross-laminated birch plywood.
3-layer engineered CosLoc 5G15 mm thick; widths 127, 160 and 190 mm; length varies by collectionFloating installation with interlocking boards. Catalogue describes 4 mm upper wear layer and cross-laid solid-birch inner construction.
Finish: CosNanoTech+ lacquer

Factory-applied protective surface finish, semigloss or matte depending on range. Brochure describes 12 coats; regular dry cleaning and finish-appropriate cleaner are specified.

Finish: Silk Oil

Four layers of UV-oil according to the catalogue, with a soft matte appearance. Requires finish-specific care and periodic re-oiling in suitable conditions.

Finish: Hardwax Oil / Hardwax Oil Combi

Natural-oil/wax finishes and UV-cured-oil combinations, depending on collection. Manufacturer describes local spot repair and specialised maintenance.

Climate & radiant heating

The brochure recommends 45–55% indoor relative humidity for solid wood. It identifies some engineered products with Silk Oil/Hardwax Oil finishes as compatible with radiant heat, subject to product-specific installation guidance.

Technical details are historical Coswick manufacturer-catalogue references (pages 47–50), not confirmation of suitability for every UAE installation. Confirm actual subfloor moisture, acclimatisation, product revisions and warranty before specification.

PRODUCT GUIDANCE

Hardwood Flooring FAQs

Does every collection use solid hardwood?

No. The brochure includes solid hardwood, two-layer engineered, three-layer engineered, and patterned parquet formats. Open each collection card to check its construction.

Which wood species are included?

Depending on the range, the brochure lists oak, ash, American walnut, Jatoba and Santos mahogany. Not every species is offered in every finish or format.

What is the difference between chevron and herringbone?

Chevron boards are cut at angled ends so the joined strips form a continuous point. Herringbone boards typically meet at right angles to form staggered zigzags. The supplied catalogue includes chevron and Renaissance parquet designs.

Can hardwood be installed over underfloor heating?

The manufacturer catalogue describes specific Silk Oil and Hardwax Oil engineered constructions as suitable for certain radiant-heat systems. Confirm the selected product, substrate, temperature limits and installation instructions before specifying it.

How do I maintain natural hardwood floors?

Use regular dry sweeping or light vacuuming and finish-specific approved products. The catalogue recommends controlled indoor humidity around 45–55% and notes that oil-finished floors may need periodic restoration.

Are all colours shown available in Dubai?

Not necessarily. These are finishes listed in the supplied catalogue, which may predate the current range. Contact Four Dimension for current availability, samples and quotations.

Are lacquer, Silk Oil and Hardwax Oil the same?

No. Lacquer is a surface film finish; Silk Oil highlights natural texture with a softer matte look; Hardwax Oil combines waxes and oils. Their maintenance and repair requirements differ.

FOUR DIMENSION · DUBAI & UAE

Have a wood flooring project in mind?

Share your preferred Coswick collection, colour, approximate area and installation location. Our team can discuss appropriate samples, product suitability and availability.

Enquire About Hardwood Flooring →